CBVSC - SPEEDHIDE LATEX S/G MIDTONE, 78-815

  • MSDS: CBVSC
  • Manufacturer: PPG INDUSTRIES INC
  • Product Name: SPEEDHIDE LATEX S/G MIDTONE, 78-815
  • National Stock Number: 8010-00N018549
Product Identification

Product ID:SPEEDHIDE LATEX S/G MIDTONE, 78-815
MSDS Date:07/30/1992
FSC:8010
NIIN:00N018549
MSDS Number: CBVSC

Responsible Party
PPG INDUSTRIES INC
4325 ROSANNA DR
ALLISON PARK, PA 15101
US

Emergency Phone: 304-843-1300

Info Phone: 412-492-5555

Cage: 47695

Contractor
PPG INDUSTRIES INC
PITTSBURGH, PA 15272 US

Telephone: 1-800-245-2974 (CAL HYPO)

Cage: 47695

Ingredients

NEOPRENE RUBB, NITRILE RUBB/LATEX. NO

RTECS: 9999999ZZ


ON PROT CLTHG FOR THIS PROD. RECS FOR SKIN PROT ARE

RTECS: 9999999ZZ


CONTACT/TOTAL IMMERSION, CONTACT A MFR OF

RTECS: 9999999ZZ


THE LEL BELOW THE STATED LIMIT, AND TO REMOVE

RTECS: 9999999ZZ


WATER; (DEIONIZED WATER)

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 55-60%

OSHA PEL N/K

ACGIH TLV: N/K


PROPIONIC ACID, 2-METHYL-, MONOESTER W/2,2,4-TRIMETHYL-1,

CAS: 25265-77-4

RTECS: UF6000000

Fraction By Weight: 1-2%

OSHA PEL N/K

ACGIH TLV: N/K


FILM FORMERS, RESINS, & ADDITIVES

Fraction By Weight: 20-25%

OSHA PEL N/K

ACGIH TLV: N/K


INHAL OF TITANIUM DIOXIDE DUSTS FROM COATINGS IS

RTECS: 9999999ZZ


SIGNIFICANT HAZARD FOR MAN.

RTECS: 9999999ZZ


CENTER, EMERGENCY ROOM OR MD IMMEDIATELY;

RTECS: 9999999ZZ


TO DETERMINE TYPE OF AIRBORNE CONTAMS AGAINST

RTECS: 9999999ZZ


LIMS, LEL BELOW STATED LIM, & TO REMOVE DECOMP PRODS

RTECS: 9999999ZZ


POLYMER FRACTIONS. EXTREME HEAT INCLUDES, BUT IS NOT

RTECS: 9999999ZZ


INCRD RISK OF CANCER FROM EXPOS. POTENTIAL

RTECS: 9999999ZZ


IS VERY LIMITED. SINCE OVEREXPOSURES ARE NOT

RTECS: 9999999ZZ


IF INGEST, ANY TYPE OF OVEREXP/SYMPS

RTECS: 9999999ZZ


CONTACT A POISON CONTROL CENTER, EMERGENCY ROOM OR

RTECS: 9999999ZZ


DISPOSAL. ONLY THE SPILLED MATERIAL AND THE

RTECS: 9999999ZZ


TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 10-15%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INGEST:HARMFUL/FATAL IF
SWALLOWED. EYE CONT:CAUSES IRRIT. REDNESS, ITCH, BURNING SENSATION
& VISUAL DISTURBS MAY INDICATE EXCESSIVE CONT. SKIN CONT:MAY CAUSE
SLIGHT IRRIT. MAY BE HARMFUL IF ABSO RBED THRU SKIN. PRLNG/RPTD
CONT MAY CAUSE ALLERGIC RXN. DRYNESS, ITCH, CRACKING, BURNING,
REDNESS & (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:SWELL ARE CNDTNS ASSOC W/EXCESSIVE
CONT. INHAL:VAP & SPRAY MIST MAY BE HARMFUL IF INHALED. VAP IRRITS
EYES, NOSE & THROAT. CHRONIC:AVOID LONG TERM & RPTD CONT. THIS PROD
CONTAINS TITANIUM DIO XIDE. ANIMALS INHALING MASSIVE QTYS OF
TITANIUM DIOXIDE DUST IN LONG-TERM STUDY DEVELOPED LUNG TUMORS.
STUDIES (SUPDAT)

First Aid

First Aid:INGEST:DO NOT INDUCE VOMIT. EYES:FLUSH IMMED W/PLENTY OF
WATER FOR AT LST 15 MINS. SKIN:FLUSH IMMED W/PLENTY OF WATER,
FOLLOWED BY WATERLESS HAND CLEANER & SOAP & WATER IF MATL APPEARS
TO ADHERE TO SK IN. INHAL:REMOVE TO FRESH AIR. APPLY ARTF RESP &
OTHER SUPPORTIVE MEASURES AS REQD. NOTE:IF INGEST, ANY TYPE OF
OVEREXP/SYMPS OF OVEREXP OCCUR DURING/FOLLOWING USE OF THIS PROD,
CONT POIS CTL (ING 7)

Fire Fighting

Flash Point Method:PMCC
Extinguishing Media:USE NFPA CLASS B EXTINGS (CARBON DIOXIDE, DRY
CHEM/UNIVERSAL AQ FILM FORMING FOAM) DESIGNED TO EXTING NFPA (SUPP
DATA)
Fire Fighting Procedures:USE NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP .
WATER SPRAY MAY BE INEFT. WATER SPRAY MAY BE USED TO COOL CLSD
CNTNRS TO PVNT PRESS BUILD-UP & POSS(SUPDAT)
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE OR BURST
(DUE TO BUILD-UP OF STEAM PRESSURE) WHEN EXPOSED TO EXTREME HEAT.

Accidental Release

Spill Release Procedures:PROVIDE MAX VENT. ONLY PERS EQUIPPED W/PROPER
NIOSH/MSHA APPRVD RESP & SKIN & EYE PROT SHOULD BE PERMITTED IN
AREA. REMOVE ALL SOURCES OF IGNIT. TAKE UP SPILLED MATL W/SAWDUST,
VERMICULITE/OTHER ABSOR B MATL & PLACE INTO CNTNRS FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:DO NOT STORE >120F. STORE LG QTYS IN
BLDGS DESIGNED & PROTECTED FOR STORAGE OF NFPA CLASS IIIB
COMBUSTIBLE LIQUIDS. PROTECT FROM FREEZING.
Other Precautions:IF THIS MATL IS PART OF A MULTIPLE COMPONENT COATING
SYSTEM, READ MSDS(S) FOR OTHER COMPONENT(S) BEFORE BLENDING AS THE
RESULTING MIXTURE MAY HAVE THE HAZARDS OF ALL OF ITS PARTS.

Exposure Controls

Respiratory Protection:OVEREXP TO VAPS MAY BE PREVENTED BY ENSURING
VENT CONTROLS, VAP EXHST/FRESH AIR ENTRY. NIOSH/MSHA APPRVD
(TC-23C-) AIR PURIFYING/AIR SUPPLIED (TC-19C-) RESPS MAY ALSO
REDUCE EXPOS. READ RESP MFR'S INS TRUCTIONS & LITERATURE CAREFULLY
(ING 8)
Ventilation:PROVIDE GEN DILUTION/LOC EXHST VENT IN VOL & PATTERN TO
KEEP CONC OF INGS LISTED BELOW LOWEST SUGGESTED EXPOS (ING 9)
Protective Gloves:NITRILE, NEOPRENE OR LATEX GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA . WEAR PROT CLTHG, INCLUDING IMPERMEABLE
APRON.
Work Hygienic Practices:CLEAN OR DISCARD CONTAMINATED CLOTHING & SHOES.
Supplemental Safety and Health
EXTING MEDIA:CLASS IIIB COMBUST LIQ FIRES. FIRE FIGHT
PROC:AUTOIGNIT/EXPLO WHEN EXPOS TO EXTREME HEAT. IF WATER IS USED,
FOG NOZZ ARE PREF. HAZ DECOMP PROD:FUMES INCL:CARBON MONOXIDE,
FORMALDEHYDE. EF TS OF OVEREXP:W/HUMANS INVOLVED IN MFR OF THIS
PIGMENT INDICATE NO INCR RISK OF CANCER FROM EXPOS. POTNTL FOR (ING
5)

Chemical Properties

Boiling Pt:B.P. Text:>205F,>96C
Vapor Pres:17.4
Vapor Density:HVR/AIR
Spec Gravity:1.16
Evaporation Rate & Reference:34 (BUOAC=100)
Solubility in Water:59.3%
Appearance and Odor:VISCOUS LIQUID W/ODOR CHARACT OF CHEMICAL FAMILY &
ANY SOLVS LISTED IN INGS.
Percent Volatiles by Volume:69.5

Stability

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT W/STRONG ALKALIES, STRONG MINERAL ACIDS OR STRONG
OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRDCE HAZ DECOMP PRODS WHEN
HEATED. WELDING, BRAZING/FLAME-CUTTING ON SURFS COATED W/THIS PROD
MAY PRDCE (SUPP DATA)

Disposal

Waste Disposal Methods:WASTE MATL MUST BE DISPOSED OF I/A/W FEDERAL,
STATE, PROVINCIAL & LOCAL ENVIRON CONTROL REGS. EMPTY CONTAINERS
SHOULD BE RECYCLED OR DISPOSED OF THROUGH AN APPROVED WASTE
MANAGEMENT FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.